All products

Allows printing heights from 5.6 to 13.1 ft (5.6 to 13.1 ft (5.6 to 13.1 ft (1.7 to 4 metres)))
in 3.9 in (10 cm) steps. Consisting of:
- 2 vertical extensions, 31.5 in (80 cm)
- 1 vertical extension, 19.7 in (50 cm)
- 1 vertical extension, 11.8 in (30 cm)
- 1 vertical extension, 7.9 in (20 cm)
- 1 vertical extension, 3.9 in (10 cm)
- Extended stabilisation kit recommended from 9.8 ft (3 metres)
- 2 transport bags
For wallPen E2 with second-generation vertical axis, not compatible with the first generation. The axis generation is to be confirmed with wallPen Service before ordering.

Material: stainless steel, ground finish
Glass: high-purity quartz glass, bonded
Mounting: three screws
Type: replacement part

Five UV protective bottles
Five print head connectors
- 6.8 fl oz (200 ml) Cyan
- 6.8 fl oz (200 ml) Magenta
- 6.8 fl oz (200 ml) Yellow
- 6.8 fl oz (200 ml) Black
- 6.8 fl oz (200 ml) White

Hard plastic, black
Standard part GN 631-40-9.4

Type: male, MTLLP-2
Function: seals the filling port
Counterpart: Luer Lock cap female FTLLP-2

Plug: type F/E, CEE 7/7
Used in: Germany, France, Spain, Italy, Poland and most of continental Europe
For: wallPen E2

Use: machine, track, tools, hands
Not for: nozzle plate

Type: female, FTLLP-2
Function: refill port on the ink system
Counterpart: Luer Lock plug male MTLLP-2

Plug: type J, SEV 1011 type 13
Used in: Switzerland, Liechtenstein
For: wallPen E2

Plug: type G, BS 1363, fused
Used in: United Kingdom, Ireland, Malta, Cyprus, Singapore, Hong Kong
For: wallPen E2

Thread: M8
Length: 0.8 in (20 mm)
Material: stainless steel

1 bottle of Yellow, 6.8 fl oz (200 ml)
with connector bottle / print head

1 bottle of Cyan, 6.8 fl oz (200 ml)
with connector bottle / print head

Function: filters UV radiation from the curing lamps
Wear: during printing and setup near the machine

1 bottle of Magenta, 6.8 fl oz (200 ml)
with connector bottle / print head

Capacity: 256 GB
Use: operating system and file transfer
Connection: USB

Retrofit kit for white printing, consisting of:
- RICOH GH2220 print head in an aluminium frame, complete with heater, cables, tubing, standard parts, circuit board and heat sink
- three bottles of white UV ink, 6.8 fl oz (200 ml) each
- software licence for white printing

Size: 4010
Included: cable harness
Cools: UV LED curing units

Function: power supply to the printhead unit
Design: spiral, self-retracting
Fits: wallPen E2

Function: seals the runner block against dust and particles
Manufacturer: HIWIN
Replace when: lips worn, rail no longer wiped clean

AC1300, dual band 2.4 and 5 GHz
USB 2.0